Captain Woodrow Cahill, SASS # 54363 Posted April 4, 2011 Share Posted April 4, 2011 Have any pards done any measuring on the different sized caps by all the different manufacturers? I"ve noticed over the years that sometimes the same size cap from different companies fits differently on the same gun. Also, has anyone used the RWS 1075 caps? A local shop got a huge supply of these, and I'm not familiar with them and was wondering if they are any good? Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted April 4, 2011 Share Posted April 4, 2011 look through this thread: http://www.thehighroad.org/showthread.php?t=578412&highlight=cap+size Link to comment Share on other sites More sharing options...
Fingers McGee Posted April 4, 2011 Share Posted April 4, 2011 Cpt, I think the info you are looking for is at post 32 on this thread: http://www.cascity.com/forumhall/index.php/topic,35422.25.html Of course, the rest of the thread ought to be of interest to you as well. Fingers (Show Me MO smoke) McGee PS. I've used RWS 1075 caps for years on my muzzleloaders, they're good caps; but, I use #10 Remingtons on my C&Bs Link to comment Share on other sites More sharing options...
Fingers McGee Posted April 4, 2011 Share Posted April 4, 2011 Ya beat me to the punch J-Bar. Now he has two places to look. Fingers (Show Me MO Smoke) McGee Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted April 4, 2011 Share Posted April 4, 2011 Ya beat me to the punch J-Bar. Now he has two places to look. Fingers (Show Me MO Smoke) McGee ..."He's quick, Joey; quick with a mouse..." Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted April 4, 2011 Share Posted April 4, 2011 Caps are like shoes. Doesn't matter what size the manufacturer says they are, the only way to see if they fit is to try them on. Link to comment Share on other sites More sharing options...
Slowhand Bob, 24229 Posted April 5, 2011 Share Posted April 5, 2011 I have been playing with some of my old stock recently and find that the #10 CCI seems to be the smallest and must literally be swaged onto the nipples of my guns and some still need a second whop to make them go. Been lucky so far with hammer setting them but with almost a thousand left, I'll keep using them for practice and just try to be careful with the muzzle while setting the caps. I have a couple of friends who have promised me a large deer tine for the seating job but I am still waiting. Link to comment Share on other sites More sharing options...
Slowhand Bob, 24229 Posted April 5, 2011 Share Posted April 5, 2011 I have been playing with some of my old stock recently and find that the #10 CCI seems to be the smallest and must literally be swaged onto the nipples of my guns and some still need a second whop to make them go. Been lucky so far with hammer setting them but with almost a thousand left, I'll keep using them for practice and just try to be careful with the muzzle while setting the caps. I have a couple of friends who have promised me a large deer tine for the seating job but I am still waiting. Link to comment Share on other sites More sharing options...
Mike Fink, SASS #29047 Posted April 5, 2011 Share Posted April 5, 2011 For all practical purposes, the cap sizes are (from smallest to largest) CCI #10, Remington #10, CCI #11 and Remington #11. I haven't used RWS 1075's so I don't know were they would fit in. I use Remington #10's on my Ruger Old Armies. CCI #11's will work if the nipples are dirty. On clean nipples they have a tendency to fall off under recoil. Hope this helps, Mike (the) Fink Link to comment Share on other sites More sharing options...
Pulp, SASS#28319 Posted April 5, 2011 Share Posted April 5, 2011 Oops, duplicate information. Link to comment Share on other sites More sharing options...
Brasspounder, SASS #9076 Posted April 5, 2011 Share Posted April 5, 2011 I've used Imported RWS No. 1075 caps on occasion when I couldn't get anything else that would work. Better by far than CCI No. 11's, and nearly equivalent to the Remington No. 10's. I don't recall ever having any cap jam or misfire trouble with them when using them on the stainless steel aftermarket nipples in my Uberti 1851 Navy revolvers. Bp Link to comment Share on other sites More sharing options...
Mike Fink, SASS #29047 Posted April 5, 2011 Share Posted April 5, 2011 I forgot to mention that I use the stock nipples on my Old Armies. M F Link to comment Share on other sites More sharing options...
Jabez Cowboy,SASS # 50129 Posted April 5, 2011 Share Posted April 5, 2011 Those RWS caps are real Good !!!! Wish I could find another 10,000 to replace the ones I shot up .... Jabez Cowboy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.