Leadnose Calhoun Posted February 21, 2011 Share Posted February 21, 2011 I have noticed that some pards want to know about TB in the Lee Autodisk. There was no chart per se, so I made up one using the cavity volumes from Lee and the VMD info from IMR powders. This is not an endorsement of any load, nor a guarantee of actual weights thrown. It is a guideline based on provided manufacturer data. Follow the link and have fun. http://s266.photobucket.com/albums/ii247/leadnose_calhoun/Charts%20and%20tables/ Link to comment Share on other sites More sharing options...
COAL CAR KID, SASS #15921 Posted February 22, 2011 Share Posted February 22, 2011 Howdy Leadnose Calhoun, I made my own by throwing 4 charges and use charge range (normally about .2 of a grain range with all disk) instead of an average; I throw two just by working the measure and one by tapping the side of the hopper and one I tap the hopper about 3 or 4 times. Their figures on the capacity of the disk are on the conservitive side; you will find the charges a little light, which won't hurt anything unless you are loading light. Check these charges bofore using it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.