Jump to content
SASS Wire Forum

Help me W/ my peep sight


Recommended Posts

I bought a Marble Armms improved peep tang sight for my Marlin rifle.

 

Very easy to install, then I tried to adjust the windage. The dial turned really hard and only went about 4-5 clicks then stopped. I loosened the adjust/ set screww and it turned O.K. but the post did not move at all.

 

I made the mistake of loosening the dial a bit more and it popped part way off, I think I lost at least one of the small ball bearings, I have three...

 

Question is, why won't the post move left or right? Is it supposed to be so tight?

 

My next stop will betrying to contact MArble Arms. For all the hoopla about the sight, I am dissapointed....

 

What did I do?

 

JJJ-D

:ph34r::ph34r:

Link to comment
Share on other sites

Hi, I am not sure what you did I have a couple of them and they have always worked fine I am not going to change my seting but it seams they went more than 4 or 5 cliks each way from center. Perhaps the thread was damaged on yours, I think if you can get it back together and working it wont matter if you have lost just one ballbaring. Lance a Lott Sacket

Link to comment
Share on other sites

Gee, I am surprised at the lack of replies to this....

 

Guess I stumped everybody!

 

Or it's too cold ta type... :mellow:

 

JJJ-D

:ph34r::ph34r:

Link to comment
Share on other sites

Hmm, they tell ya NOT to mess with it and let the little balls out.... I'd contact Marbles and send it back. It wasn't working right BEFORE ya tried self help, and if one ball is missing, ain't gonna work right now. I sent one back to em years ago, they fixed or replaced it no problem.

Link to comment
Share on other sites

Thank you for the helpful replies.....

 

I am waiting for a reply from Marbles how,

 

and next time I'll NOT put peep in the thread title.

 

JJJ-D

:ph34r::ph34r:

Link to comment
Share on other sites

Thank you for the helpful replies.....

 

I am waiting for a reply from Marbles how,

 

and next time I'll NOT put peep in the thread title.

 

JJJ-D

:ph34r::ph34r:

Well it's been six days and I have yet ta hear from Marble Arms about what to do about the sight....

 

Guess I am stuck with a sight that don't work.

Link to comment
Share on other sites

Pard,

Try giving Brownells a call on your problem.

Ask for their tech advise guy and you will probably

get at least a little hep.

Even if stuff costs a few extra cents, I always try to

buy from Brownells due to their terrific customer support.

Good luck.

Best

CR

Link to comment
Share on other sites

Pard,

Try giving Brownells a call on your problem.

Ask for their tech advise guy and you will probably

get at least a little hep.

Even if stuff costs a few extra cents, I always try to

buy from Brownells due to their terrific customer support.

Good luck.

Best

CR

Thanx fer the tip!

 

That's where I bought it so I will do that...

 

JJJ-D

:ph34r::ph34r:

Link to comment
Share on other sites

Dear Jitterys.. this is Deja... ya know I can not stop laughing about this thread.. please change the title.. lol.. Oh, my gosh..

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.