Jump to content
SASS Wire Forum

Last Call Saul

Members
  • Posts

    455
  • Joined

  • Last visited

Everything posted by Last Call Saul

  1. if the deal with rmurphy92 falls through, I will take it
  2. Never knew about them until today when I saw one for sale... they are not lightning design, but single action, and 357.... https://www.gunsamerica.com/digest/imi-timber-wolf-ahead-of-its-time/
  3. I cut the notch deeper. if not enough, might have to cut the elevator steps
  4. as soon as I get out of Illinois
  5. Ok... it's not for SASS then... it's to put a stupid grin on my face everytime I shoot it with a full power 44 mag in the indoors range... And to be my truck gun in case they will prohibit everything black and semiautomatic
  6. Almost a year ago, I had a stupid idea of getting a mare leg lever in 44 mag and turning it into SBR. Took me a few tries to get the stamp - it was denied twice for some unspecified reason, but finally stamp is here, stock is on, and it is as much fun as I expected! It was shooting way too high, so I had to use a Dremel on the rear sight... the 20" 1873 rifles are for size comparison. BTW, I don't think SBRs are prohibited for SASS competition, are they? I am thinking of taking it to the match and shooting a stage or 2
  7. if they offer it in the direct message and have literally everything you need, it's a scam
  8. Average Joe! Congrats on becoming a SASS merchant! I can vouch for him and his tool being above average! I love mine! It reduced my shotgun fumbles... now, can you come up with something that will make me shoot a clean match? See you in spring, Joe!
  9. I had a console vault before IL had concealed carry and kept my gun there. Now I don't see the point - the gun is always on me, and when I am not in the truck, it's also not in the truck. I set up a "gun case" in the under-rear seat storage bin in my new truck - but that's just to store the guns on the way to the range. when I am at the big shoot - guns are coming to the hotel room.
  10. in my rifle it is a wedge that goes into the bolt and the extension rod, that is held by the same pin that attaches the toggle arms to the bolt
  11. no, that's a 38... Maybe I was not persistent enough. will try it next winter
  12. Actually, yes, I do. I tried to wiggle the bolt out without removing the hammer and couldn't... so I remove the lower tang. is there another way?
  13. If the bolt is out of the rifle - it takes extra 5 min to take the extractor out - I have the jig and the punch and the length of the heat treated wire for replacement pins...makes it easy it's getting the bolt out of the rifle, what takes time and patience
  14. Every year, towards the end of the season, the extractor in my rifle collects enough grime underneath to start affecting the rifle action. It is an aftermarket heat-treated one, so the extractor doesn't need replacement, and after I disassemble the rifle each winter, take the bolt out, knock the pin out, and clean under the extractor, it is all good for almost all year. I clean my rifle every few matches but usually don't take it fully apart during the season. I was wondering if there was some way to keep it clean under the extractor - some preventive care without the need to strip the gun completely down? Something quick after a few matches? some magic cleaner that would dissolve it all?
  15. I am having it right now. one day of fever followed by two days of nasty cold. hope to be done by Thursday
  16. my wife left Soviet Union when she was 15. she has no accent at all I left USSR when I was 19, but spent 7 years in Israel before coming here - I have a very pronounced accent, but it is not the same is native Russian-speaking people have when they speak English
  17. Mine doesn't have a cap at all. It's just a spring loaded flap under the locking little door
  18. I am not sure if this website software allows it, but on ar15.com, they have a feedback system and the number of positive (or negative) transactions is displayed under each user's name and avatar.
  19. Yeah, the price for the python was too good to be true. Also, I saw that he was posting here and there but had no completed sales on any of his items. I asked MM to tell me where he was shooting and he gave me the club name, but I could not find his alias on any of the posted scoresheets. In IMs, he requested a USPS money order and provided the name and address of Rocky Mount, NC. I located a few local clubs on FB and sent inquiries to the FB page admins. Duc was quick to answer that he had no idea who that was. Duc called the SASS office and verified that the SASS number belonged to another person and that MM used VPN and Nigerian IPs to connect to the SASS wire That was the end of it
  20. Maybe pouring water ON the bag? Submerging the open bag will displace air inside...
  21. venison!!! had 50 lbs of summer sausage and smoked andouille made last weekend, made some bacon wrapped backstraps, 15 lbs of venison salami are curing now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.