Dallas McBoomboom
-
Posts
479 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Dallas McBoomboom
-
-
I'll take it pm on the way
-
18 hours ago, Wild Willi said:
It’s right hand. I guess I mirrored that one pic by mistake. I thought this pard would be interested but I guess not. It is the only blunderbus I ever came across.
wwThat is cool as all git out!
-
I'd love to find one too. I've looked at the kits, but right now I need another project like a moose needs a hat rack. Seems like everything out there is either a toy or 3500 bucks+.
-
I'll take the 200 rounds of starline for $140, pm on the way.
Dallas
-
As the proud owner of a Cholla hat band, I recommend that whoever buys the hat, ask if he has a band he'll sell you to go on it. Great pard and great bands.
-
1
-
-
13 hours ago, Flanigan Flats said:
I have a real basket case of an upper and lower receiver that I took as a challenge a few years ago. I basically built a wall hanger full of good parts. I bought original parts off eBay mostly and put it back together. But…. Because of the condition of the upper receiver it really isn’t viable for more than parts for some one else’s build or a wall hanger. Barrel is very good. The wood is very decent. Internals are all in good condition. If you decide you need a parts gun we can talk.
I'll send you a pm shortly, thank you!
-
I'll be danged. Looks like Winchester Bob has the retractor! Sent him an email to order it, thanks again @Ustas B. Slim 24680!
-
1
-
-
28 minutes ago, Irish Pat said:
i have a lower tang for one if you need it
That's one of the parts I have, that particular piece has been nickel plated at some point. Thank you though!
16 minutes ago, Ustas B. Slim 24680 said:Try Winchester Bob @ https://winchesterbob.com/
Just bought a firing pin retractor, firing pin and mainspring for a 73 in 32WCF from him
If you need to line the barrel see Robert Hoytt at 717-642-6696 out of Fairfield PA. Got the daughter's new/old 73 in when he was doing another '73 in 32-20 and had a 2 week turn around. Quality work. Don't expect that unless he has another .32WCF in the queue.
Thank you, I'll check with him!
-
I was recently given an old basket case 1873 in 32-20, built in 1887, and seems to have been basically molested since then. I've tried all the old parts sites I know (still open to suggestions), but hoping someone on here has a firing pin spring and firing pin retractor that are in excess of their needs. Kind of a long shot, but figured I'd try. Thanks for reading!
Dallas
If nothing else, oughta be fun in 6 months when a brand new guest swears their dear friend turdburglar@clownpenis.fart has several of exactly what I'm looking for brand new.
-
2
-
-
Insurance guy, huh? So he can send me the money, and then I'll decide whether or not it's enough, and if I'm going to actually send him any guns based on what someone who knows nothing about guns says. Then I'll send him another bill at the end of the year, because I might have sold them to someone else for more, even though I didn't. If he decides not to buy my guns, I'll fine him for non compliance at the end of the year That's how it works, right?
Kidding aside, I do actually have a pair, I'll send you a pm.
-
1
-
-
On 11/30/2023 at 8:02 AM, Boonie Young said:
WHL, I'll take all 1k. I've switch over to Pale Rider and I don't know how many times I'll be able to reload. LOL. Where and how should I send the gold? I'll PM you my contact info.
Atta boy Boonie!
-
Just stopping by again to drool.
-
Making a quick stop at my local financial institution for a high speed withdrawal. If the local constabulary doesn't get there in time, I'll be back to put a bid on those pistols. If they do, look for a "WTB file baked into a cake" post.
-
1
-
-
Damn that 44-40 is beautiful!
-
I'll take that 25-20 die set, pretty sure I still have your PayPal info. PM on the way.
-
Great! I'll send you an email for payment info.
Dallas
-
I'll take the 401043 38-40 if still available.
-
I'd be interested in talking about any additional die/punch sets you might have for the Lyman that the purchaser doesn't opt to buy. Give them first shot of course.
-
Looking for a Ruger Old Army for a project. Doesn't need to be in great shape, doesn't even need to be complete, although mostly working would be great. Don't care about sight type or finish. This is for a madboy experimental conversion project, I'm not trying to spend a thousand plus on a safe queen, but I'm not scared to spend a few bucks. Who's got that cardboard box full of Old Army that cousin Bubba tried to convert to 458 Socom and put a red dot on? Thanks in advance,
Dallas
-
2
-
1
-
-
I'll take the RCBS 38-55 set. Pm on the way.
-
On 7/12/2023 at 11:25 AM, polishcappers said:
Hello Dallas McPewPew,
No problem, just order anything in our e-shop and we will send you this ordered item and the lost screw. We do not sell only spare parts but we always help our Customers.
As I understand you need this closing brass screw, holding the lid in place.
Please write also the e-mail with the reminder to us after placing the order.
polishcappers@tlen.pl
Yours,
Agnieszka and Zbigniew
Polish Cappers
Warsaw, Poland
With you since 2017
I honestly don't really need any other products right now, just the replacement screw. Can you work me up a price for a replacement and shipping? Thanks!
-
Hey PC fellas, I love my capper, but the little brass set screw dropped out and got lost at some point at a match. How can I order a replacement screw?
F/S DILLON 45 ACP SQ. DEAL CONVERSION
in SASS Wire Classifieds
Posted
Sent you two pms, are you not receiving them?