Jump to content
SASS Wire Forum

Stopsign32v

Members
  • Content Count

    201
  • Joined

  • Last visited

Community Reputation

42 Excellent

Previous Fields

  • SASS #
    Guest

Recent Profile Visitors

1,494 profile views
  1. AH! I got it figured out. So the screw with the spring is actually a button. Pressing it in is the only way to release the forend. By me trying to force it off I guess I backed out the screw. I screwed the lose screw back in with the button pressed and now the gun functions fine. Locks up tighter than a bank vault too! Just fired off some bird shot in the back yard. Works perfect!
  2. Firing pin moves freely and easily. Just checked by holding down the triggers and pushing the ears, then pushing the firing pins back in.
  3. And I remember now, this IS the forend that was originally on the shotgun when he shot it. I remember because of the 4 dots. Also the seller sent me pictures and I just looked. This is the original forend that he had on it.
  4. Ok I tapped tapped tapped gently and got it to open all the way and removed the shells. Then removed the forend and this is what I got. A screw backed out all the way which no doubt didn't help anything. And the front thing does thread and there is a spring.
  5. Its been so long there is no telling. I don't believe so though. But you guys seem to be right. All Stevens 235s I can see do not have this forend.
  6. Yes, it does open with it off. This is when the barrels would open further than they should (not sure if this is normal or not.) How do you fit it correctly? I'm not new to double barrels and how they go together. I just don't want to force something when it shouldn't be. The knob on the front really has me wondering. Does it do anything?
  7. I don't remember what model it is. Maybe a 225 or 235? Anyways I got it and put it together a while back and have never shot it. I put two empty brass casings in it and I cannot get them out. From what I remember it would at first open all the way, as in hinge too far sometimes. Then it stopped doing that and now it seems to not open quite far enough to take the shells out. The lip of them hits the receiver. I put it away for months and just pulled it out to look at and would like to finally get it operational. I've tried to open it and can't get it to open easily and don't want to damage it. So I wanted to come here and ask you guys how it actually works. In particular, what is that knob at the front of the forearm and how does it work? As well, it is missing the rear screw to the trigger guard, does anyone know where I can find a replacement? I know it shot by the owner because I saw it. Only when it was taken apart I apparently can't put it back together correctly.
  8. Did you find your Pre 64 - I have one that I would sell.  I have never fired it and I don't think the person that owned it before me had shot it either. It looks brand new.

     

    I want $875 plus shipping to your FFL.

     

    Let me know if you are interested.

    Sassy Teton Lady

    Betty Woodburn

    352-455-1457

  9. How much are you looking for? I have several hundred once fired Starline with a few Win and R-P mixed in?

  10. If you are still interested in the Marlin, I might ship, have to find out how and the cost.

    1. Stopsign32v

      Stopsign32v

      Could you please email me more pictures? My email is KStover8442@yahoo.com

       

      I'd love to give her a good home!

       

      Kevin

  11. Thanks for the reply. I can get a Rossi with the old bolt in it for $400. I could swap the bolts and probably still break even. Would it be worth the hassle in your mind? Would it cause smoothness issues in the action and would the headspace issue be something you could do? 

     

    Thanks
     

    1. Nate Kiowa Jones #6765

      Nate Kiowa Jones #6765

      It could cause all the above. You gotta keep in mind, Rossi has been making these guns since the 60's so the parts will vary from gun to gun year to year. Also, the bolts are caliber specific.

      As for the headspace if it ends up excessive that will require removing the barrel setting the shoulder back by one thread thickness, trimming the chamber face to the correct headspace then reaming the chamber back to spec. That job alone is $300.

    2. Stopsign32v

      Stopsign32v

      I see, I would probably pass on it then. Thank you for the advice. 

       

      I plan to get your DVD and tune kit. The issue I'm running into with my Rossi is it is messing up the rims of my brass. I took one coil off the extractor spring and it made it much better but there is still a small mark on all of them. Would the DVD show how to get rid of this or will I have to live with it? Brass falls a foot behind me when cycling. 

    3. Nate Kiowa Jones #6765

      Nate Kiowa Jones #6765

      you mean the ejector. That's the plunger part in the face of the breech bolt. If the marks are on the rim you will want to reduce the extractor, the bar on top of the bolt. The DVD shows all of this. Use my ejector spring, too.

  12. I may have what your looking for. I have a R92 24' octagon in very good condition. It has a lever wrap and Butt cover and very smooth. I'd like $500 and will be at EOT if interested. I can send pictures if interested

    1. Stopsign32v

      Stopsign32v

      I'd love to see some pictures. Can you text them to me 8642163702 or email them to me KStover8442@yahoo.com

    2. Two Timer

      Two Timer

      Sent an email. Please let me know if you need more. There are no scratches, Looks like new. I was told from the guy I got it from in a trade it had some action work. 

  13. Stopsign: Thanks for the info, will keep it in mind. Bulldog Brown

    1. Show previous comments  16 more
    2. Bulldog Brown

      Bulldog Brown

      OK  Thanks  Bulldog

    3. Stopsign32v

      Stopsign32v

      Good grief I apologize. It seems I'm not cut out for this shipping stuff!!!

       

      Here is the tracking number and I hope you enjoy it. It's a nice old looking 51. 9505 5107 0646 8167 0718 84

       

      Should be there Tuesday it says.

    4. Bulldog Brown

      Bulldog Brown

      I will enjoy it. Thanks let you know when it gets here Bulldog

      You must have put this on a super fast stage, I got the 51 today, it will work for what i want it for. Thanks Bulldog

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.