Jump to content
SASS Wire Forum

McCandless

Territorial Governors
  • Posts

    3,743
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by McCandless

  1. The MagTech is looking like the old Winchester rounds from the 1990's - early 2000s. They had that deep cannelure. I always wondered if brass (if used multiple times), would break off there.
  2. Stage description usually reads, "Texas Surrender, with hands on pistols (or pistol)"... This is so cross-draw shooters are accomodated without disadvantage. If it's not written that way, your Posse Marshal will normally make that clarification.
  3. If you'd prefer, the ETS Mag Speed-Loader is sold on Amazon. I found out that these multi-round speed loaders require significant force.
  4. If you already have one that you want to use to get started.... I started out with a Stevens 311. Oy! After having it worked on, and then doing the "$7 fix" It was still a gun that I had to use my off hand to open wide enough instead of going for my shells. The major mistake was having the barrels cut down. The gun needs that forward weight to open the breech. Then it has that big lug between the chambers that increases the fumble-factor while loading. Anyway, here are some older instructions for working on it. https://marauder.homestead.com/Stevens311.html
  5. Cowboy Mounted Shooting at Winter Range 1996. CMSA founders. L to R: Bronc aka John Peel, William Bruce aka Jim Rodgers and Rawhide Rawlins aka Phil Spangenberger.
  6. Whatever you choose for a start line, even if it's just "Ready". Please, say it loud enough to be heard, or nod your head. Remember, T.O.s are wearing earplugs, too.
  7. I followed Widder's exact instructions, measurements, and tweaks that he posted on Marauder's Old Irons site and made my Marlin into a Widdermatic. That little rifle is slick now. The timing was off before I started as I did have an instance of the "Marlin Jam". If you do want someone else to work on it, since Widder retired, he taught Slater at Slater's In House Guns, in Louisville, TN, how to sweeten up sour Marlins. In your neck o' the woods, Cowboy Carty, Carty Allaman, Western Gun Works, Monmouth, IL (309) 536-0163 is a wizard with Marlins.
  8. For loading with Cleanshot, I used Scarlett's data and settled on 3.0 grains with an overall cartridge length of 1.485 I do recommend dropping down to 125gr bullets when you next buy or cast them. No problem with knockdowns as the velocity is faster using the same amount of powder. Anyway, 3.0 is a good starting point and if you want even more oomph to kill those pesky charging rhinoceri, you can tweak your load.
  9. A question to ask is, do you reload? If yes then it's only a matter of the difference in the cost of components. If no, then .38 special is far more economical than paying over $1 a round for .45 Colt... 120+ rounds per match x the number of matches you shoot per month. That's not counting any practice you may wish to do.
  10. Private Message sent. I saw that you had your phone number posted. Don't respond to any texts or calls, it ain't me. Scammers have been posing as sellers that way. Let's communicate via PM Thanks!
  11. Cleaning out the workshop in preparation for moving. I'll post a lot of "stuff" for guns I worked on or don't have anymore... I have 5 pair 4 pair of blued .36 caliber percussion cylinders for the Pietta "1851" Navy revolvers. Also will work for Pietta 1861 .36 and 1862 .36 Enough for 5 more stages without recharging. 4 pair have the engraved naval scene, 1 pair are blank. None of the cylinders have turn lines. Stock nipples. None are frozen. Freshly lubed. Buy 1 pair, 2 pair or all of them... 75.00 per pair, plus shipping.
  12. Cleaning out the workshop in preparation for moving. I'll post a lot of "stuff" for guns I worked on or don't have anymore... First up. A pair of blued .36 caliber percussion cylinders for the Pietta "1858" Navy revolvers. One is in new condition. The other is in 90% condition with no turn line. 75.00 for the pair, plus shipping.
  13. Those Peters cartridges were made with King's Semi-Smokeless Powder, which was an early form of BP substitute. The powder mill was located between Cincinnati, OH and Miamisburg, at a place called King's Mill. It was where Kings Island Amusemant Park now stands.
  14. The question I was asked this morning was, (paraphrasing 'cause CRS), "What is the allowed barrel length of the 1911 used in Wild Bunch?"
  15. I lucked into an 1899 44W about 2 years ago. Really nice, but I haven't used it in a match yet. So, far just target shooting. Functions nice, but was considering lightening the mainspring, the lever plunger, the lever safety, and a one-piece. I have 2 guns on the bench before that, so I'll get to it once't I find a round tuit.
  16. Just for curiosity's sake, can a one-piece firing pin work in a pre-1900 Marlin 1894? No, I haven't taken it apart yet., Just wanted to see if y'all had any experience with 'em.
  17. Thunderbolt Taylor, 1993 EoT
  18. I'll take the 38/357. PM me your particulars please?
  19. Kid Clayton, Doc Holliday, Bootlegger, Ringo, and the Hangman, 1998 Western Action Shooting Society, (New Zealand) - End of Trail
  20. I solved the problem by having guns of just about every caliber, and shooting what I'm in the mood for that week! By the way, be careful how you store "Cowboy" guns. They tend to spontaneously multiply while you're not looking.
  21. We did a poll on this a couple of years back: .38 special is by far the most used caliber in SASS followed by .45 Colt then .44-40 a distant third. After that, there is a wide range of other calibers in use .32H&R Magnum, .32-20, 38-40, .44sp, 44 Magnum, 9mm, .36 percussion, 44 percussion, 45acp, 7.62 Nagant, and many more...
  22. Tommy just got through repairing a couple of antique pin-fire revolvers. He can help with yours pocket pistols. Island Gunsmith - Tommy Bonnet (alias - El Q Jones) Amelia Island, FL (904) 557-4909
  23. Los Pistoleros de Santa Margarita - the Santa Margarita Gun Club at Camp Pendleton monthly match. The matches at Pendleton were unique among other cowboy matches, in that the Marine Corps rifle range offered the opportunity for some very challenging stages. The rifle targets for most stages were set out at 75-100 yds, with at least one stage with rifle targets at 200 yds. There was always a team event at the end of the match. Because of the stages' tough, challenging, and slower nature, there was only time for 4 or 5 stages per match. Most stages were shot with only one or two guns.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.