Lunger
-
Posts
730 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Lunger
-
-
I'm pretty sure I had a couple primers not fully seated last Saturday. I've placed a shim, or "penny" under the push rod to insure the primer is bottomed out each time, and fired 50 rounds through her gun and 50 through mine with no misfires, and deep dents. Culpepper, could I get you to take a quick look at my primer depth when I see you at the range? I'll bring factory sts also, but my wife hates the recoil of the factory ammo. My reloads feel about like the featherlite ammo did, and she's fine with that. It just has to fire everytime though. Lol!
-
These are win 209s Yusta.
-
Lumpy, that's what I was suspecting, and that's why I slipped a penny under the push rod for priming. Just fired 50 rounds outta my wife's gun, guess I'll fire another 50 through mine. They all had deep dents too. It was cold the day of the missfires, so I froze the wife's sg in the freezer for a full hr, pulled it out, and BANG! Springfield, its a mec 650. The problem could have been a high primer. I need to know if its fixed or not. I'll go fire another 50 rounds through my gun this time I guess......
-
Both guns are denting the rest of the hulls nice and deep. I just had the one light hit last Saturday, and so did she. Her gun is also denting deeply. I'll step in the garage, and shoot some more with her gun.
-
My wife and I both run skb shotguns that have never missfired, ever. We each had one light hit with a missfire. I saved her shell, and measured the rim thickness, and diameter, visually looked it over. The diameter across the rim was ten thousandths less than almost all of them. I thought this might allow the shell to go further in the chamber, causing the firing pin not to reach it. Found another shell like it finally, and put it in the left chamber, stepped onto my porch, and Bang! Anyway, I'm using a different press now, and wondered if my primers were being seated all the way down. Long story short, I placed a penny under my push rod, and now feel the primer bottoming out. I'm going to shoot 50 rounds off this morning. Did I FIX the problem? Trying to get us loaded for WR, and i'm very worried to say the least. Have anyone of you shooters ran into this? Thanks, Lunger
-
They had it on right, or you wouldn't be shooting 700 yards with it. I was shooting 1300 today with my 28 nosler. I'm leaving that one with my muzzle brake on it. No can for that one.
-
My neighbor has that system, with the surpressor threaded on to the muzzle brake, that is threaded on to the barrel. Not sure that it reduces recoil anymore than just a surpressor threaded directly to the barrel in felt recoil. We share the same smith in Idaho, and he's truly a machinist. He properly installed it for him. Its a 338 lapua improved. Couple things I don't like about the surpressor are the shift in point of impact, and the length of it. If you buy a 30 inch Hart for the velocity, then have to spin another 8 inches on it, it's too darn long. You either have to load tune, and zero the gun with it off or on, because the poa is different even though it will shoot tight either way. Now some gun makers are building their rifles with a short threaded barrel, with a protective thread collar on it figuring the buyer will put a surpressor on it. This ruins the velocity of the cartridge cutting 6 inches off of it. I spose if I were shooting high volumes of rounds in one spot on a bench, I'd buy one. Lunger
-
1
-
-
Depending on what caliber, and and surpressor you buy, it'd be wise to see your gunsmith. Many surpressors only have .050 clearance, and the threads on yor barrel for the muzzle brake you have are tipped just enough to get the bullet to "bump" a baffle, or end cap. If you don't already know, have a real gunsmith place a pilot in, and make sure you have clearance. It doesn't take much to take up that 25 thousandths on one side of the outfit to get the bullet to touch, destroying accuracy. Many smiths just thread the darn thing, and spin the muzzle brake on. Doesn't hurt a thing if that's the way you're going to shoot, but an 8 or 10 inch surpressor loaded with baffling is another story.
-
Almost forgot, 4198 worked great also. Recoil may have been a little sharper, but it didn't kick you really hard. I didn't have any 5744 to try. I don't think my rifle was fussy. It wanted to run right outta the gate......
-
Lumpy told me to use unique in my 1895...........it shoots tight with the 405 at 100. No complaint from me. Lunger
-
1
-
-
-
You, and a few others are trying to come up with marketing methods, ect for someone ELSE to do. You figure sass needs to fix this, withno real eeffort on your part. New members start at individual club level, word of mouth, getting a spectator to try a stage at the end of a shoot. Many times a spectator knows a family member or friend who would be a likely prospect. None of us would even know eachother if it weren't for sass. The clubs in my area that had opinions like yours all laid down and failed. Their poor attitude and behavior drove folks off, and then withered away from there. The other clubs have a different story, and outcome. I'm not here to dance around the problem when its plain to see and fixable. I noticed the guys that are so vocal, and worried about membership do little to help it. Seen it first hand in my area. Lunger
-
No, I use modern longrange stuff. The farm has steep rolling hills, long draws, and flats. Quick twist 243, 6.5 creedmoore, and 28 nosler, fit in better. Shots from 200 to 600 are comcommon for the area. I do have a long brushy area above the house that works out great for muzzleloader season. The muzzleloader has waaaaay more snort than my 105 gr slugs from my 66. I've shot magpies with my skb, but that's a poor choice too. A full length, choked sg would work much better. Oh, I forgot, I did shoot a deer with a 535 gr postell, at 200 yards once. The deer wandered off in some crp for a ways. The bullet was 20:1 lead from a 4570 loaded with black. It killed my deer but the bullet went through with no expansion. If I hadn't shot him through both lungs with that bullet, I would've lost him. The sharps was a poor choice. I killed a buffalo awhile back with a 50 cal muzzleloader and pure lead round ball. I still have the ball, it blew through both lungs, and lodged in a rib on the opposite side of the bull. That ball performed perfectly. It flattened out like a saucer, and did severe damage to the vitals. There's not an all around gun that does it all, or we wouldn't have so many. Lunger
-
For starters, I paid the entire sass affiliation fees for a local club that dropped sass recently. I didn't need to spend a nickel because i'm a life member as of a couple yrs ago, but feel I should help out when i'm able. New shooters come to my farm for cas shooting lessons for free, I fix their guns for free, I go to WR every yr and support my friends, and sass in general. Donate to wounded warrior program, that sass took up a collection for. My wife does at least as much, and is there for me. I'd say I have a fairly good reputation. Hoping I can quit there dedeye george, most of my friends in our sport work as hard as I do at it, like sass, and cas is supposed to be. Ask anyone in the northwest if you like, they'll tell you I don't ask what's in it for me. Lunger
-
2
-
-
You still say that people only join sass for the"what's in it for them". I'll thank God tonight, that I wasn't raised that way. I won't address the rest of your nonsense. I see from your sass number that you are pretty new to the game. I hope you will continue to be a member, and learn about what sass does for everyone, and not necessarily just yourself. Dr Phil couldn't convince you, and a few others, so I know a farmer like myself can't. Lunger
-
Maybe just write the stage to where everything is staged on the table, and guns may be returned to the table or holstered?
-
Try to spend at leat a hundred on the tripod, more if you can afford it. A gentle breeze will make the whole outfit jitter enough to really frustrate you. On a hot day with mirage, you will be set on 20 power for a clear picture. I even turn my swarovski down on 20 or 25 power to clear the picture up. Anyway, try to get a really good, and heavily built tripod. Lunger
-
You should get out and shoot some, Mud Marine. If you did, you would know that colville WA holds an annual shoot every yr. It's an actual sass club that is close to your home. Lunger
-
Why stop there? You can freegraze on this forum, and get all the rule updates and info without being a sass member. You hope that sass figures out a way to bring in new members, but the question is what are YOU doing to bring new members? You support non sass clubs, and encourage that, do you think that's helpful? What's in it for me attitude is whats wrong with succeeding at anything. Just stunned, Lunger
-
2
-
-
Almost daily in the winter. Have a bunch of custom stuff that I run, like quick twist 243, 6.5 creedmoore, 28 nosler, 308, several sharps cartridges, and muzzleloaders, Gibbs ect. Now that WR is only a month away, i'll work on cowboy more. Springtime on is tougher because I farm, but still shoot a lot! Lucky I can shoot from my garage in bad weather.
-
Some folks are "what's in it for me" i'm in it for "what can I do to help insure the future of cowboy action shooting and sass" a review of post 17 may clear the whole thing up for you Casey. Good day now. Lunger
-
If what you're saying is true, they shouldn't be blowing the rent money at a shoot. Never would have believed that a club of people couldn't come up with 50, or 100 dollars in a yrs time. A lot of clubs shoot twice per month, collecting money from the shooters every couple weeks too. Makes no sense, and everyone knows it. Lunger
-
Toranado, you wrote that out better than I could have. Thanks, that was what I was attempting to point out! I thought it was 50 dollars! Just wasn't sure of it enough to mention it.
-
That's a great point Matthew, your family should come first over hobbies. This hobby or sport can be rather expensive, like any other. If it were cutting things that close, family has to come first. No argument from anyone on that.
Anyone use HSM bullets?
in SASS Wire
Posted
i can only vouch for the 405 gr slug from hsm. They are accurate in my 1895 marlin lever gun with Unique powder. i can't hardly scratch the slug with my thumbnail,so they're pretty hard. Not sure how they'd be with black powder,but work well with smokeless. The rifle is shooting an inch and a quarter at 100 yards with the marbles tang sight on it. I don't remember the price,but bought a second box of them at sportsman's awhile ago. give them a try,and let us know what you think. Lunger