Abilene Al, SASS #72248

Irish, Not sure if I have 44 Starline, I know I have some brass, it may be just mixed, I will look when I get home. Abilene

BTT

Larry, I don't think most folks give much thought to how much time it takes to de-prime each round, put them in a tumbler to clean, dry and sort them and then bag them for $10 a hundred. De-prime in a single stage (hard) De-prime in a hand de-primer (harder) De-prime in a turret press (even harder) Abilene

BTT

Pards, If you have had a problem or just want to replace your wire Dillon Case Ejector I have some, with nut/socket head screw and thread lock applied (removable type) and Allen wrench to install. I have several available (but limited) on first "I'll take one" basis. Dillon Blue of course. $12.50 shipped Other have them cheaper with no nut, screw, no wrench and you pay shipping. Abilene

45 LC Starline Brass (NEW) $30.00 per hundred plus shipping NOT SHOWN (just saw them for $47 +) 45 LC Starline Brass (Once Fired) $22.50 per hundred plus shipping 45 LC Brass (Used) $20.00 per hundred plus shipping 45 ACP Brass (Once Fired) $20.00 per hundred 9 MM Brass (Once Fired) $15.00 per hundred

Yes, for the fourth time. I think your mail box may be full Al

Bo B. Sorry, don't understand, do you have large primers are you willing to trade primers for powder. Need primers, do not need powder. Send me a PM and let's discuss how we may be able to help each other. Abilene Al

I have a Brown custom screw knife scabbard that can be added to the back edge of a holster. Have your screw knife with you wherever you are at a match for a quick repair or tighten a loose screw. Saddle leather color that even looks good with Black holster. You never know it's there until you need it. $25.00 plus shipping (should go in a padded envelope and very light weight)

Pards, I have 3000 Federal Small Pistol Magnum primers to trade for Federal Large Magnum primers I have 1000 Winchester small pistol primers for sale or trade for Federal Large primers Abilene Al Yes, I know about HazMat.

I'll take the second set of 30-30 dies with shell holder. Info for money order, PM me. Abilene Al

Slim you were first with "I'll take it" so you win, unless you want me to answer Doug? Abilene Al

Cowboy Hunters, I have several hundred 405 Gr. Jacked 45-70 Bullets. If there are any legal Buffalo left out there. $55 a hundred plus flat rate shipping. These are beauties. I also have a few lubed 405 Gr Lead Bullets for $40 a hundred plus flat rate shipping Abilene Al

Colesville Bob, I see you are a hunter, if you are using the 45-70 (Non SASS) I have several hundred Jacket bullets bullets for reloading. They are 405 Gr. 45-70 lead with copper jackets. Not for Cowboy use... Abilene Al

Pards, anyone need a nice shorter 97 stock. It was my wife's stock. $50 plus actual shipping. Please send zip code if interest to find shipping. Abilene Al

Cowboys and Hunters, Six boxes plus 13 rounds of 30-30 once fired brass, two boxes of Federals are in belt holders. The four Winchesters boxes have Styrofoam separators. Shipped for $45.00

Pards, Good starter loader for those on a budget, everything you need to get started reloading. Check out the picture everything goes except; only the Lee scale, not both. $300. Shipped and shipping ain't cheap. Comes with two heads for two different calibers.

Sounds like someone knows a good investment when they see one. Like the other cowboy said "wish I was there". Abilene Al

Pards, I have two Dillon shellplate bearing kits, one I install in my Dillon XL650 also fits the 750. Somehow I managed to order two, from two different suppliers, both or "Hit Factor". www.ebay.com/itm/300359068964 Paid $13.95 + $5.35 + Tax, yours for $15.00 shipped SPF I also ordered this one, it is from Armanov and fits a Dillon 1050 / RL1100, paid $39.90 + Tax + shipping and I own an old XL650. Need to lay off that Tequila when on the computer (let's don't get crazy) Brand New in original package for $35.00 shipped. https://www.armanov.com/shop Cost way too much to send back to Armanov. I also double ordered this item two, a Allen Wrench holder that snaps onto the mounting pipe for a case feeder, which does put them in a more convenient place to reach them than behind the machine. Again paid $12.80 from Armanov plus tax and shipping. $14.00 shipped it is yours. As you can see from the picture it has other uses. SPF Locator Pin Tabs for Dillon Presses 550, XL650, 750, 1050 and 1100 $5.00 for 3 Thanks for looking, just trying to get someone else a bargain and get some of my money back. Abilene Al

Boonie, Need more, I will be happy to supply. I believe I even have new Starline if interested also. Abilene

Wild Hair Larry, I have about 8 lbs of pins, for the help you gave me they are yours if you pay the shipping, you choose the shipping venue. Abilene Al

Jim, If you need a little more let me know and if you need some nice lubed lead bullet to go in them let me know. Abilene Al

Pards I have two really nice hats for sale, one is tight weave palm Mex Hat, the other is a real nice two purpose hat, one "town hat" the other "military hat". The Mex Hat $60 plus actual shipping cost. Size 58 metric 7-1/4 This hat can be worn by 7-1/8 by putting tightners behind the inside band. The Two Purpose Hat $75 plus actual shipping cost. This hat has a silk hat band under the removable military braid This hat has a high crown and can be worn in really hot weather as it is not sitting right down on your hair (if you have any)... Just remove the braid to go for town hat look. Size 57 metric - 7-1/8 When I get an address, I will box the hat and ask for shipping cost. You can choose UPS or USPS shipping. Hats are in eastern NC. Both are in perfect like new condition. Thanks for looking. Abilene

Classic Single Action is owned and operated by Joe Perkins in Tucson, Arizona https://classicsingleaction.com/ Best grips made, but a waiting list.