Jump to content
SASS Wire Forum

Rootin Tootin

Members
  • Posts

    1,018
  • Joined

  • Last visited

Everything posted by Rootin Tootin

  1. I need info on how to contact them Send me a PM Need a 97 repaired.
  2. Hey Boom Pop, If you have Charles Daley shotguns I have a bunch of Charles Daley 306 parts from a gun that I parted out. See the pics.  I have a stock with a couple of cracks at the wrist but could be dilled and pinned with a dole rod.  The beaver tail and locking mech is good. and the barrels are great.  All parts plus barrel and beaver tail  $200 and stock is free.

     

    Or $75 for receiver parts and $125 for Beaver Tail and Barrels and I'll toss the stock in for free.

    .plus shipping

     

    Any interest

    Receiver parts.jpg

  3. John,  my number is 563 349 2273   Rootin Tootin

  4. John, If he doesn't buy, I'm interested. Is it Satin Or Blued.  Thanks  RT

  5. Jack, is it Satin or blued. Do you have pics.  Thanks  RT

    1. Show previous comments  4 more
    2. Rootin Tootin

      Rootin Tootin

      Shipping would be to Davenport, IA  52807.  

    3. Rootin Tootin

      Rootin Tootin

      Thank You John. 

       

      My name and info is ;

       

      Paul Reinartz

      6153 Christie CT

      Davenport, IA 

          52807

    4. Rootin Tootin

      Rootin Tootin

      My FFL guy. Del Rich Pawnbroker  563 323 2631 

      in  Davenport, IA

       

      Delrichco@aol.com

       

      Thanks... Rootin Tootin

  6. Moses, just saw your post.  I'll shipp for $115.  Thanks  RT

    1. Show previous comments  3 more
    2. Rootin Tootin

      Rootin Tootin

      tracking # 9505 5265 5256 3082 5775 40   USPS    Thank You.  RT

    3. Moses, SASS #5964

      Moses, SASS #5964

            Rootin Tootin

         The grip frame and grips came today. They look great.

                                            Moses #5964 life

    4. Rootin Tootin

      Rootin Tootin

      Glad you're happy.  Enjoy  RT

  7. Chuck.  Your phone number is still in your add on the wire,

  8. I have one set of checkered Eagle Micarta (Black) GF grips to fit OMV   $125 shipped

    Thanks... RT

  9. OK Kd.  I have Pay Pal    prluckyy299@aol.com

    or

    PMO to

    Paul Reinartz

    6153 Christie CT

    Davenport, IA  52807

    1. Show previous comments  9 more
    2. Diego Kid #4631

      Diego Kid #4631

      Hey, thanks a lot. Will let you know when they arrive!!!!!

      Diego

    3. Diego Kid #4631

      Diego Kid #4631

      Got them today, Thanks. Looks good!!!!!!!!

      Diego

    4. Rootin Tootin

      Rootin Tootin

      Thank you.  Glad you like them..  RT

  10. Scissors, Pics sent. Also, I need to know the prefix on your guns. I have barrels for NMV and OMV. Want to be sure you get the correct barrels.  OMV have 2 numbers and NNV have 3    Thanks  RT

  11. Hey John.  Thanks.  PMO or PayPal  prlucky299@aol.com

     

    Paul Reinartz

    6153 Christie C

    Davenport, IA  52807

     

    563 349 2273

    1. Rootin Tootin

      Rootin Tootin

      Thanks for PayPal   I need your address to send sights

  12. Hey Randy. Rootin Tootin here. I saw your post about a lever lock to help prevent jacking a live round. I'm planning on getting one but want to know with it installed how do you show clear at the unloading table with the lock installed without pulling the trigger? The only way I can see to do it is to pull the trigger and gradually lower the hammer and cycle it then. 

    Thanks.  RT

    1. Show previous comments  2 more
    2. Randy Saint Eagle, SASS # 64903

      Randy Saint Eagle, SASS # 64903

      Hope so too, it is a little harder to put the rifle back together but not bad. I install the right links, right side plate then roll it over and drop in the lever lock and left side links. I have a short punch approximately the same diameter at the side plate screw  I stick through the hole in the right side plate and through the lever lock. Then I install the left side plate and push the punch through the hole, now I can put the screw on the end of the punch and push the punch back out to help me keep the screw aligned.  I hope that made sense? It is actually pretty easy once I got used to it.

      If it doesn't make sense I can make a video and send it.

       

      Randy

    3. Rootin Tootin

      Rootin Tootin

      Randy, Thats the way they recommend in the instructions.  I have a number of punches that will work.  Thanks again.   

    4. Randy Saint Eagle, SASS # 64903

      Randy Saint Eagle, SASS # 64903

      You are very welcome, I think you'll like it.

       

      Randy

  13. I have a spoked wheel for $25 plus 10 for shipping.  I replaced my wheels last year for both the plastic versions but saved the one spoked wheel for just this occassion.    RT

  14. I have a forend if you are still looking for a 20 inch with an Octagon barrel.  RT

  15. Any interest in the parts or the entire Charles Dailey after you viewed the pics.

  16. OK Buddy.

    Paul Reinartz

    6153 Christie Ct

    Davenport, IA 52807

     

    Send me your info so I can send the bolt.   Thanks  RT

  17. OK Copperhead. Thanks

     

    Paul Reinartz

    6153 Christie Ct

    Davenport, IA   52807  

    My e mail is    prlucky299@aol.com   phone   563 349 2273

     

    so send me your address so I ca send the bolt.  

    1. Rootin Tootin

      Rootin Tootin

      Sorry   I ment Copenhagen   I hate that spell check

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.