Jump to content
SASS Wire Forum

Garrison Joe, SASS #60708

  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by Garrison Joe, SASS #60708

  1. Have had real good luck with free (up to lots of photos) Google Photos. Good luck, GJ
  2. Good luck with your casting efforts! It's both easier than most folks think, and harder than it looks. Since you have already been referred to the best learning materials (Fryxell's work and the Lyman Cast bullet Handbook) above, I'll add some quick-start tips. Good, clean alloy of what ever hardness you choose is VERY important. So, never melt down range lead or wheel weights or any metal that is not already real clean and of known content in your casting pot. Get an old cast iron pot and melt "dirty" lead in that, flux and stir until NOTHING will come out of the metal, and cas
  3. Yep. Or one can just leave the spring in and ALWAYS be able to load 6. About 3" of uncompressed spring out the front of the mag tube works fine. Good luck, GJ
  4. Well, replacing the bead in a Uberti front sight might get a little tricky. Don't know that any one knows the shank diameter that is behind an Uberti bead. The usual way of getting a big bead up front is to drift out the old sight and fit and drift in a new one, for maybe $30. A commonly used sight, and one I would recommend from personal use, is the Grabber, available at the Smith Shop http://www.thesmithshop.com/grabber.html You will want a .410 height for the normal Uberti sights on a rifle-type 73. The .130 bead is pretty big, and the .175 bead more like a shotgun bead, B
  5. I'm pretty sure that NK (the OP) can sort out what he gets as answers, though. Good luck, GJ
  6. An exact count would probably be available if you asked in the Wild Bunch forum, but you can pretty well count on no more than 30 pistol, 10 rifle and 6 shotgun per stage, and 12 stages of regular match and 4 stages of warm-up. I'll let you do the math. Rifle has a good chance of being less. Shotgun could be just a couple more - worth taking an extra box or two. And don't forget extra for WB side matches, including clay birds. Which we don't have word about yet. Bring a BAMM rifle if you got it, too. Good luck, see ya there! GJ
  7. So do I. It's not what I recommend for keeping the peace. Good luck, GJ
  8. A 12 Brinnell bullet needs about 10K PSI pressure to obdurate the base into the rifling of the barrel. Almost never will pards get that kind of pressure in a revolver with BP or with subs. Good luck, GJ
  9. Softer shooting. 2F will give less pressure and recoil. Nice in pistols especially if filling the case. good luck, GJ
  10. SOFT SOFT SOFT. No more than Brinnell 8 for my BP bullets that I cast for revolvers and main match rifle loads. About 5 parts soft lead, 1 part COWW and enough tin to get to 0.5%. Good luck, GJ
  11. THEN Order parts from Ruger (assuming they will let you buy those parts...) Good luck, GJ Could be a slight possibility that the frame suffered damage or was weakened by the bone-charcoal case hardening that Longhunter does. They (LH) don't (chemical) color case. They case harden guns. You might not be able to see that until you get the old plate out of the recoil shield.
  12. I load BP by using a Lyman 55 BP measure and cycle the rotor by hand every case. That removes any steel parts from the powder measure, and I'm pretty confident that it is safe for how I load. Good luck, GJ
  13. Ok, your recoil plate has sunk into the recoil shield because the plate's crosspin is probably sheared or missing. Look at the parts diagram, parts 40 is the plate, and 41 is the shield plate crosspin https://www.midwayusa.com/general.mvc/index/Schematics~ruger_vaquero You can order those parts from several suppliers, Midway and Brownells being a couple of the premier vendors. That cross pin is very tiny. Get a small enough pin punch to drive that out. Make sure you catch the firing pin spring and firing pin and put them back in using the same orientation as what they came o
  14. HR - Can I suggest you go back to your original post and clean up the sentences. Several of them are not making sense. A squib load and another load that is hot in the same batch of ammo might suggest your powder drop is not consistent, or other loading practices are not high quality, ending up with little powder in the squib and too much powder in the hot round. Primers backing out (and staying backed out) in revolvers is usually caused by too light a load. It takes a moderate amount of pressure in the fired round to shove the fired empty case back against the recoil shield on t
  15. Wood is so much cheaper than PVC. I make stands with a 2x4 base, uprights of furring strips, and target support boards cut from old thin plywood. Last for at least 5 years and very light weight (except for base). The uprights will take a few hits without being destroyed, too. Goodluck, GJ
  16. When I buy a gun, I don't want to be lucky. I want to be sure that it works right for most folks. And that I can get parts. Now, the (single stack) Paras being close clones of most 1911s - parts would not worry me. Guns that are not close to 100% reliable are even less interesting to me than guns that are not accurate. Good luck, GJ
  17. Since Para has been bought up by Remington in 2012, and there were lots of reports of some problems with reliability (feeding especially) with their Para built single-stacks like this WB model, and not knowing exactly what extra nice parts might be on the WB version, I would be reluctant to buy one over about $450 or so. If you want a reliable gun then the Remington's own R11, Springfield Mil Spec or Range Officer, Ruger and government type Colts are twice the gun from what I would expect an older Para would be. Just my opinion without having hands on experience. Good luck, GJ
  18. Revolvers - Rowdy Yates - have the Manhattan Conversion done to virtually eliminate detached cap jams. He will also make it very reliable. Sure, you could convert rifle to .44-40 easily. Same length as .45 Colt, same rim diameter. Track of the Wolf has some .44-40 rifle barrel liners at reasonable prices. Just have to drill, install liner and recut chamber and recesses. Are you wanting to shoot Black Powder? If so, .44-40 would be a MUCH better choice than .44 Colt, or .45 Colt for that matter. Good luck, GJ
  19. Changing the forum's use of fonts would be a forum setting that a moderator might be willing to look for and adjust. Then again, they might not want to spend the time or take the risk of messing the forums up. Changing fonts in your own posts is up to you - you surely can do that. Changing fonts in other pard's posts is not in your powers as a forum user. Most folks when they have problems with their browser showing text so it is readable, punch up the "magnification" of the browser - that would be control + to bump up one step and control - to drop a step on most browsers. So
  20. Long reach back to just show that my needs and your needs may be at variance. When I was in my first 5 years of shooting SASS, I used dry fire a lot to speed up my load and shuck. Now that I have that timing built in, I practice more with transitions and accuracy at speed. Dry fire doesn't show me the accuracy part. So, I now mostly live fire shotgun. Good luck, GJ
  21. Yep++ Don't need to fire rounds to get in good SG practice. Lots of pards know how to make up dummy shells for shotgun. If you are using a 97, you probably want light weight dummies (no shot) - this saves the extractors/ejector from the extra work of kicking out heavy rounds. If using SxS, then usually heavy weight dummies are better to practice with. Good luck, GJ
  22. AND: Given the couple of large bays that host 4 stages shooting simultaneously, picking brass would also be impossible due to having to declare a "cold line" periodically to shag the posse's brass - and even more delay if each shooter was to get their own brass back. Don't worry. More new brass is available now than over the last five years, thanks to Starline expanding production. Good luck, GJ
  23. Black Diamond models were a "high end" variation from the factory. But the "valuation add" for that model goes down fast as the gun is used. And your pictures show tons of wear. That is not a collectors gun at this point in its life (unless there is a "story" to the gun that makes it historically interesting), so value it just as a shooter, based upon it's condition and reliability. Like a well used commemorative or engraved gun, there is no added value for the fancy added features. Depends upon condition of the gun, especially the internals. And the serial number range
  24. 45 degree angle is plenty. Shotgun loads will leave you with a disappointingly small lead recovery, as a much larger fraction of the lead turns into lead dust. You might even be able to use a water pan, much easier to get the lead out of water than sawdust, but then, the sawdust you can leave in the lead as you melt it and it just helps flux the melt. Pick your target for setting in front of your recovery plate carefully. If you shoot standard knockdowns with their vertical target, even a small knockdown will intercept 80% of the shotgun pattern at cowboy distances and vaporize th
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.