Bullett Sass 19707

I have had a pair of 5.5 inch in my hand in Canby OR at their annual match. I noticed them because I shoot 4 5/8 in 32s. Bullett

I live very close to Boise and have never heard of them. Bullett

I have loaded 444 brass for the 410 using black powder. I would have to check but I think I loaded about half way full with 3f or 4f and cardboard wad and the rest with #9 shot and glued a cardboard wad over the load. My daughters had a great time with them and very little recoil. Made about 8 to 10 inches of flame on a cloudy day. Bullett

I used 1000 in 9mm cases could not wait till they were gone. Very difficult to seat. The 9mm i was using was unaltered. Bullett

32 SW, 32 long 32 h&r mag and 32 auto all run well in my Ruger single six. Bullett

BTT

When using hollow base bullets, if you up the powder a little they shoot more accurately in my guns. I think the skirt flares out a little more. Bullett

For sale Remington model 700 in 7mm mag. Synthetic stock and barrel had baked on coating. Shot very little and kept in great condition. Barrel is 26 inches. Would like $650.00 plus shipping. Reply to this add or pm me. Make sure your FFL will accept from an individual. Thanks, Bullett

If you dont get what you need let me know. Bullett

plus 2

Happy Birthday to SASS and 22yrs of shooting in Cowboy Action for me. Bullett 19707

I have had good service and good bullets from Rim Rock. Bullett 19707

I have also shot with lunger and his wife. Runamuck said it better than I could. +1 for Bullett 19707

I shoot USPSA and 3 gun, have shot rimfire challenge and steel challenge. I started with SASS in 1992 and USPSA in 1988 and 3 gun last year. high school shot small bore indoor gallery and yes the high school did have a rifle team. Bullett 19707

Kuna is a good person to deal with. Bullett 19707

BTT

Very nice work, Bullett 19707

I get the same nothing to see

This is from the Oregon State Black Powder match 2015. Match was hosted by the Pine Mountain Posse near Bend Oregon. Great range and a great group to shoot with. Thank You Bullett 19707

For sale is an RCBS strip loading tool. This would be the Strip loader and the priming press that mounts on the bench. For the press I have the handle and shell plates for different shells. Would like $100.00 plus shipping. Thank You Bullett 19707 http://i96.photobucket.com/albums/l197/Bullett19707/Rods%20stuff%20006_zpshjrku9fh.jpg http://i96.photobucket.com/albums/l197/Bullett19707/Rods%20stuff%20007_zps07l8mbhi.jpg http://i96.photobucket.com/albums/l197/Bullett19707/Rods%20stuff%20008_zpsvpmrdj9o.jpg

I have seen several 73s made to shoot the 45acp. These were used in Wild Bunch and I think I saw several gunsmiths do them. Bullett 19707

I shoot very light shotgun loads with clays and at about 20 degrees it makes a large flame out the muzzle and sounds strange. I up the powder in the very cold and problem almost goes away. Bullett 19707

What REB said. Been using 7/8 oz loads since 1995 knocks down everything I aim at. Bullett 19707

GJ is correct as long as the smallest amount of the bullet protrudes it is perfectly legal. I have shot it a state and regional matches. Bullett 19707

Thank You Bullett 19707