$700 +shipping ffl2ffl or p2p at SW Reginals

IMG_20260416_154458.heic

Thanks for looking

Tennessee Snuffy

 More safe cleaning!   Have two Ruger New Vaqueros, blued, one 4 5/8 inch barrel, one 5 1/2 inch barrel, both 357 mag.  Bought these a few years ago used, so I could plink with them.  Decided I like old model Vaqueros better and so these have just been sitting quietly in the safe, waiting for a day in the sunshine.   Both in very nice condition with smooth trigger pulls and easy cocking.  Clean, bright bores and cylinder chambers and accurate, too! No smithing done to them outside of  the 4 5/8 barrel one going back to Ruger to make POA=POI!  Will come with the gray Ruger boxes as well. Am pricing the pair of them at my minimum of

$1295 shipped for both, FFL to FFL, USPS MO please!

(If you want more pics, please let me know!)

(Barrel discoloration on the 4 5/8 one is artifact; bluing is even!)

I "fell into" two of these machines at an estate sale.
The shooter was recently deceased, and his wife & kids had his reloading equipment up for sale.
One was a new-ish 550C, which I am keeping, & the other was his current machine -- The one I am selling.
He purchased the second 550, to use with large primers, because he was tired of changing over the priming system.
The cool thing is that I just bought a new one, so now I have 2, one for small primers, and one for large primers, so I won't be changing over primer systems either!

Details:

This is an older 550B (~2009).
The lower part of the machine has the zirk fitting upgrade for greasing.
The upper fittings are the older-style knock-out arm pins.

It needs cleaning & greasing.

Included:
•    The basic reloading machine, set-up for small primers.
•    Large primer slide & primer dispensing tube
•    One each small & large primer pick-up tubes.

• Assorted tips for pick-up & dispensing tubes

•    Plastic primer follower, Primer Operating Rod, spent primer collection bin.
•    550 Powder dispenser system, including small & large powder bars
•    Cartridge Collection Bin Bracket, Dillon Machine handle, Loaded Cartridge bin, hex wrench set, mounting bolts

Many of the parts are attached to the machine.

Included is a plastic bag containing Primer Pick-up tubes, Large primer dispensing tube, Primer actuating bar, Powder drop actuating bar

Inside the shipping carton is a brown cardboard box that contains:
•    Loaded Cartridge bin, Spent primer collection bin, Cartridge Collection Bin Bracket
•    Large Powder Bar, Large Primer Slide, Index Sprocket, Index ball & spring, brass-tipped set screw, set of hex wrenches, 3 die Lock Rings, mounting bolts

$375 + Shipping.

Shipping will be in a Dillon factory box, using UPS ground, insured
If you are close to me (Cleveland), shipping should be reasonable.

I did a few test locations: 

Insured Shipping to Kentucky -- $25

Insured Shipping to Sacramento -- $45

Insured Shipping to Fort Myers -- $37

NOT included:
•    Cartridge Conversion kit, or dies
•    Strong Mount, bullet tray, low primer sensor, low powder sensor

Thanks for lookin'

--Dawg

$75.00 shipped in the 48 contiguous states. If interested send me a PM.

Freedom Arms 83 454/45c  7.5 octagon barrell, micarta grips., TSOB rail & Z rings, Burris 2x scope full quick change set up for 550 in 45C.  $2800

Freedom Arms 1997 Target Master 22mag, Special FACA edition,22 LR cylinder, 6" octagon barrel  rail with Optima 2000 red dot

FACA1XX.     $2500

FA/Casull imp 22LR Buckle gun $400

Smith & Wesson 642 Airweight 38sp

$400

1906 Colt Bisley 4.75" #258xxx

DMAX 45c/410 complte holster rig included.  3xx.    $600

$1600 for the pair.

These have been de-primed & sized, sonic cleaned, tumbled with Walnut, and sonic cleaned again- all large primer.  200 pcs $30 shipping included to lower 48 states.  

Venmo/PP Friends & Family or Cash FTF in Northern CO / I will also be at 2026 Colorado State Cowboy and Wid Bunch Match May 15-17 in Whitewater CO.  

- M. T. BEERS SASS#115497

Asking $1,100.00 or best offer. Prefer face to face in Central Texas. The cost to ship the ammo would be too much.

Willing to trade for straight stock 1873 rifle in 45 colt with a 20" barrel, stainless Ruger Vaqueros old or new model with 4.62 barrels  in 45 colt. Would consider partial trade for a set of strong side Schofield holster rig for 5" barreled Schofields with a belt that measures about 43-44 inches to center hole. 

PM to work out details.

$75.00 plus actual shipping. Size 13 wide

CC

Willing to trade for straight stock 1873 rifle in 45 colt with a 20" barrel, stainless Ruger Vaqueros old or new model with 4.62 barrels  in 45 colt. Would consider partial trade for a set of strong side Schofield holster rig for 5" barreled Schofields with a belt that measures about 43-44 inches to center hole. 

PM to work out details.

Good Day:
All books are in good condition.
Media Mail or Ground shipping will be added to the price, so please send zip code
Paypal Friends & Family or personal check works for me 

SOLD -- 1.  Gunsmithing Guns of the Old West by David R. Chicoine -- $45
SOLD -- 2. Guns of the New West by David R. Chicoine -- $10
3. Lyman Reloading Handbook 49th edition --$10
4.Lyman Pistol & Revolver Handbook -- $5

PM with questions
Thanks for looking
--Dawg

I am helping my brother and brother-in-law get their Dillon 550 presses set up to load various rifle calibers. I am looking for 6 each of the Dillon BL 550 Powder Dies. They have a set screw to hold the powder funnel in place (please see picture below). Let me know what you have and how much you want for it shipped to zip code 92583. Please post pictures. 

Thanks,

Ethan

 Have these two 44 magnum Ruger Vaqueros, blued, 7 1/2 inch barrels, for sale!  They are the original large frame Vaqueros, capable of those heavy duty loads if needed!

Ruger #1 has a bit more exterior wear than #2, but on both guns, cylinders and barrels are clean, clean!  They are totally stock; sights unmolested!  (I did replace the aluminum ejector rod housings with factory Ruger blued steel ones!).  They have become safe queens to me and need better homes!

FFL to FFL, USPS MO please!  Will ship in Ruger gray boxes. Shipping $85 per gun, (unless someone buys both and then I will see if the shipping can be decreased).

Ruger #1 $645-- NOW $600

Ruger #2 $695--NOW $650

Ruger #1:

Ruger #2:

 one is set up for 9 mm $500.00 don’t look at the mess this is a moving sale 

will split the shipping get pics later 

1 charles daly 500 with funneled chambers, and lightened springs, no extras asking $525

1 stoeger coach gun, race ready with screw in chokes tubes asking $625 action work by gunsmith frank. 

1.  Pair of Taurus Gaucho revolvers, 45 colt, blued, 4 3/4 inch barrels, not consecutive numbers.  I am not sure these guns have ever been fired, very clean if they have been.  Includes the boxes and keys.  Asking $1100 for the pair.

2.  Uberti 1873 rifle, 45 colt, 20 inch hexagon barrel, lever wrap, big bead front sight, completely stock, no other cowboy mods.  Butt stock has a couple of cart scratches and dings and the former owners alias is laser engraved into the stock but it is far enough back it can easily be covered with a butt cover.  Asking $1300

3.  IAC model 97 12 ga shotgun.  Threaded for chokes, no signs of use or wear.  Very nice shotgun.  Asking $900

4.  Original Winchester 1897 12 ga 2 barrel matching numbers set.  C prefix, made in 1902, 28 inch full choke barrel and  18.5 inch cylinder bore barrel.  Butt stock has a couple of cracks but still solid and tight, forearm on the cylinder bore barrel has a Crack but tight and solid.  Original finish is gone, has some minor rust pitting in spots but nothing that would hinder function.  These matching number sets are kind of hard to find.  Asking $1000

5.  S&W lemon squeezer pocket pistol, 2 inch cut down barrel, 38 s&w caliber, nickel finish.  Locks up tight and functions properly.  Grips in nice condition.  Asking $350

6.  I've Johnson pocket pistol, 32 s&w short caliber, 4 inch barrel, locks up tight and functions properly.  Blued with some

bluing loss.  Asking $300

Please reply on this post, first I'll take it gets it.  I am also open to offers by pm.  

Here are pictures. 

I am selling the left and right strong side holsters for $225 shipped anywhere in the continental United States.

First, I’ll take it, here on the wire, gets it.

Questions? PM me for a fast response.

Thanks for looking.

J. J. Longley SASS 38655

SPF  The Harris bipods are LM 1a and 1a2 ,  9-13 inches, notched legs.  Each $30 which includes shipping.

SOLD:The grips include stag and ebony that do not fit my 3rd generation colt well. Pachmayr presentation large frame, pachmayr gripper k frame square butt, radical grip 1911 Colt wrap around, and finally Hogue monograph for k&l frame round butt. $50 for all which includes shipping.

Athlon 50mm sunshade never used for Argos or Helos btr scope. $15 which includes shipping. Feel free to make an offer or ask for more pictures.

(Gun is not included)

All of the brass is Starline and only once fired.

 Total of 100 pieces of brass.

  Price is $100 shipped to you.

Thanks for looking  !

Please PM me with any questions

Thank you for looking

I made these for myself when I was shooting Classic Cowboy. Went on to another category before I ever wore them, been sitting in the leather box unused. So, if you’re looking for a pair of spur straps to spice up your Cowboy Action shooting, this might be right for you.

The spur straps are for sale for $45.00 shipped anywhere in the continental United States.

First “I’ll take it” here on the wire, gets it.

Questions? PM me for a fast response.

Thanks for looking.

J.J. Longley

SASS #38655

Hodgdon Tite Group - 8 lb, $275

Hodgdon Clays - 4 lb, $140

After moving, I haven't done as much reloading as I thought that I would, and if someone in the SA / Austin area of the hill country needs some powder, I will be able to meet you for a FTF. I don't have a hazmat license, so no no shipping. Both of these are sealed, and I didn't get into them, so if you are into reloading, this should take care of it for a while..

Please PM me for more information.

Thanks,

L H

Know of anyone that makes em?

Would love leather, lower cut for faster draw, possibly canted, , for cross draw

TIA